How to connect to TECHNICOLOR CGA2121 wireless network: Click on Wirelless icon to show all the avalaible Wi-Fi networks. Choose factory Wi-Fi name written on the sticker located at the routers bottom cover. Enter TECHNICOLOR CGA2121 factory Wi-Fi password written on the sticker located at the routers bottom cover.
If you see boxes prompting you for your Username and Password you are on the correct page. The Default Technicolor TC7200 Router Username is: admin; The Default Technicolor TC7200 Router Password is: admin; Go ahead and enter the username and password and click the Login button to access the web user interface. Technicolor Usernames and Passwords
WPS button: Wi-Fi Protected Setup. TM. This button can be used to: Secure the connection with another device (PC for example) using WPS protocol. A long press (press 2 more seconds) on the button allows you to enable the association of the modem with a PC or other equipment. After link establish. A short press on the button, switch on/off Wi-Fi.
Wi-Fi IEEE 802.11b/g/n on board Interfaces other WPS button Reset button Dimensions 220 x 165 x 42 mm (8.7 x 6.5 x 1.6 in.) Power supply 120-240 VAC, 50-60 Hz Operating temperature 0° to 40° C (32° - 104° F) Operating humidity 20 % to 90 % non-condensing Storage temperature -20° to 70° C (-4° - 158° F)
Technicolor TC7200, you need the IP of your device, the username and password. You'll find such information in the Manual of your Technicolor TC7200 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below.
10.0.x.x and 192.168 are not in the same network, I'm surprised you could ping actually. It sounds like the printer is configured with a static (not dhcp assigned) IP. Either get the printer to ask dhcp for an ip or change it to a static 192.168.0.xx IP. Gateway would be the routers ip likely 192.168.0.1 –
LJy1V. 39 824 475 476 596 31 175 905
how to change wifi password technicolor tc7200
